Skip to main content
All servicesSpecialist Service

Evaporation & vapor loss control for storage tanks.

Evaporation is the quietest line item in a gasoline terminal's accounts: product leaves the tanks as vapor, revenue leaves with it, and emissions rise in parallel. Many operators book 0.5–1% monthly losses as a cost of doing business. It usually isn't — it's a list of specific, findable, fixable loss paths.

-94%
Monthly losses — Cogico
0.8% → 0.05%
Measured loss rate
Peak summer
Validation condition
Zero
Air emissions — IPT separator

Why it matters.

At Cogico's Jieh terminal, this practice diagnosed those paths — seal condition, breathing-valve setpoints, fitting integrity — and executed targeted calibration and modifications. Monthly gasoline losses fell from 0.8% to 0.05%, a 94% reduction, deliberately validated during the hottest months of the year so the result would hold in the worst case, not just the average one.

Scope of service

What this service covers.

01

Loss Baseline & Measurement

Establishing what is actually being lost — reconciling gauging, temperature and movement records into a defensible monthly loss figure before anything is changed.

02

Inspection-Led Root-Cause Diagnosis

Physical inspection of tank bodies and accessories — seals, roof fittings, vents and breathing devices — separating tank-fabric leaks from breathing-loss mechanisms instead of guessing.

03

Corrective Design & Modifications

Targeted fixes per loss path: seal and fitting upgrades, pressure-vacuum valve calibration and setpoint optimization, and operational changes — engineered, executed and supervised.

04

Blanketing & Vapor Management

Inert-gas blanketing and pressure-control design where product protection demands it — as engineered for FAP's hygroscopic polyol storage in Ghana — plus vapor-handling option studies for gasoline service.

05

Worst-Case Validation

Performance confirmation under peak ambient temperatures — the operating condition that breaks half-measures — so the loss reduction is real in August, not just in the report.

06

Environmental & Commercial Reporting

Emissions-reduction documentation for regulators and a recovered-product accounting the finance team can verify against stock records.

Codes & standards

Designed to the standards your regulator reads.

API MPMS Ch. 19API 2000API 650 (appurtenances)Local environmental codes
Who this is for

Built for owners, operators and their partners.

  • Gasoline terminal and depot operators carrying chronic monthly stock losses
  • Operators under emissions pressure from regulators or neighbors
  • Owners who want a measured, validated result — not a study that sits in a drawer

Engagements run project-based (defined scope and deliverables), as a standing technical advisory retainer, or start small with a fixed-scope audit — see engagement models.

Download the capability statement (PDF)

FAQ

Common questions about this service.

Where do gasoline storage losses actually come from?

A handful of mechanisms: standing (breathing) losses through vents and poorly set pressure-vacuum valves, working losses during filling and emptying, seal and fitting leakage on the tank itself, and occasionally measurement error masquerading as loss. An inspection-led audit separates them — because each has a different fix.

What reduction is realistic?

It depends entirely on the starting condition — which is why the audit begins with a measured baseline. As a reference point: the Cogico programme took a terminal accepting 0.8% monthly losses down to 0.05%, a 94% reduction that held under peak-summer temperatures.

Does the terminal have to stop operating during the work?

No. The programme is inspection-led and tank-by-tank: diagnosis, calibration and modifications are sequenced around normal receipt and dispatch operations.

Is this an emissions project or a profit project?

Both, by construction: every kilogram of vapor that stays in the tank is product you sell instead of emissions you report. The same programme produces the commercial recovery and the environmental-compliance improvement.

Next step

Describe the asset — get a scoped approach back.

A short description of your facility and challenge is enough to start. You'll get a discovery call invitation and an initial qualification questionnaire — available worldwide.